The LePage PL400 Sub-Floor and Deck Construction Adhesive is built for use as a heavy duty adhesive for structural projects that require strength, flexibility and durability.

Build

This adhesive is excellent for interior or exterior applications and remains flexible to compensate for different expansion rates of dissimilar materials.

PL300 is perfect for a variety of moisture and temperature applications including freezing temperatures, dry or wet framing materials, frozen surfaces and hot temperatures.

At least one surface being adhered together should be porous for best results.

Cured PL300 provides a smooth flow in temperatures between -17°C and 49°C.

This adhesive is also great for filling in gaps and irregularities to help provide a smooth surface.

PL 400 eliminates floor squeaks!

Safety

When using indoors, make sure there is adequate ventilation to the outdoors. This will also help provide a proper cure.

Wear gloves and wash hands thoroughly after use or contact with this product.

Capacities

How to Use

• All surfaces must be clean, dry and free of loose materials
• Cut spout and puncture seal
• Apply adhesive using a caulking gun in a continuous bead
• Apply to joists, studs or back of siding/panels
• Use nails for support and alignment
• Do not smear beads
• Allow 48 hours for curing at room temperature and before additional coverings are placed over adhered surfaces.

Clean-Up and Storage

Use mineral spirits to clean uncured adhesive and cut or scrape to remove cured adhesive.

This adhesive is freezable.

Follow HAZMAT procedures for disposal of product and container.

Store away from heat, flames, sparks and keep in a well ventilated area.

Certifications, Standards, and Regulations

• ASTM D3498
• APA AFG-01