The LePage PL200 Drywall & Paneling Construction Adhesive is built to provide a long-term, water-resistant, small gap filling, quick bond to drywall and paneling materials.

Build

This adhesive is excellent for interior or exterior applications and can help to reduce the number of fasteners required by 50-60%.

PL200 is heat resistant and is recommended for Fire-Rated wall and partitioning projects.

At least one surface being adhered together should be porous for best results.

Cured PL200 is waterproof and weatherproof, and is gunnable in cold weather.

This adhesive is also great for filling in small gaps and irregularities to help provide a smooth surface.

PL 200 provides a strong, all-weather bond!

Safety

When using indoors, make sure there is adequate ventilation to the outdoors. This will also help provide a proper cure.

Wear gloves and wash hands thoroughly after use or contact with this product.

Capacities

How to Use

• All surfaces must be clean, dry and free of loose materials
• Cut spout and puncture seal
• Apply adhesive using a caulking gun in a continuous bead
• If installing panels to drywall, apply adhesive in a zigzag pattern
• Use mechanical fasteners at the top and bottom to hold panels in place
• Avoid using warped panels for best results

Clean-Up and Storage

Use mineral spirits to clean uncured adhesive and cut or scrape to remove cured adhesive.

This adhesive is not damaged by freezing.

Follow HAZMAT procedures for disposal of product and container.

Store away from heat, flames, sparks and keep in a well ventilated area.

Certifications, Standards, and Regulations

• ASTM C557
• ASTM E72
• ASTM E84
• CAN/CGSB 71.25-M88