Estimated Availability Date:
Call for Availability : 403-342-6030
No customer reviews for the moment.
The Dow GREAT STUFF™ Pestblock Insulating Foam Sealant is built as a pesticide-free way to block spiders, ants, bees, cockroaches, mice, and other insects and rodents while also insulating and air-sealing the location.
Build
This product will adhere to most building materials.
Dispense in any direction by using the provided straw that will help to direct the foam into the gaps and cracks you want to fill.
Seals gaps and cracks up to 1” to provide an airtight seal and is water-resistant.
The product is trimmable after 60 minutes with a serrated blade and can also be sanded, stained, or painted.
The surface of this foam can discolor when exposed to sunlight so it is recommended to paint it if this makes a difference to the appearance of the final finished project.
Pestblock contains NO pesticides so it is a friendly way of blocking pests from entering any location!
Safety
Wear eye protection, gloves and protect the area from the excess product.
Uncured foam can be cleaned with acetone or GREAT STUFF PRO Cleaner for best results! Cured foam on hands or surfaces must be removed mechanically or allowed to wear off.
Keep ignition sources away from this foam and use them in well-ventilated areas.
How to Use
- Shake can vigorously for at least 30 seconds
- Dispense slowly, this product expands!
- Mist with water to speed curing times
- Dries grey colored and cures rigid
- Not suitable for being dispensed in cold temperatures
Technical Data
Tack Free | 5 - 15 Minutes |
Ready to Trim | 60 Minutes |
Full Bond | 8 Hours |
Curing Type | Moisture Cured |
Location Use | Indoors and Outdoors |
Shrinkage | None |
Gap Size | Up to 1 Inch |
(Cure rate is based on 70 ± 5°F and 50 ± 5% RH, 1-inch bead diameter, 6-inch length. Cure times depend entirely on temperature, size of foam bead, and humidity.)
Certifications, Standards, and Regulations
- UL Classified
- CCMC 13074-L
- Expanding Foam Adhesives: Adhesives that expand when expelled and harden when exposed to air. They can be used to insulate, seal gaps and cracks, or adhere surfaces together.
Vendor Part #: | PB12S |
Full Cure Time: | 8 Hours |
Environment Use: | Indoors and Outdoors |
Material: | Polyurethane Foam |
Resistances: | Water |
Cure Type: | Moisture Cure |
Dry Color: | Grey |
Finishing: | Trimmable, Sandable, Paintable |
Gap Size: | Up to 1 inch |
State When Dry: | Rigid |
- √Preventing Pests from Entering a Location Where they are not Welcome
- √Filling Gaps around HVAC Ductwork
- √Filling Gaps around Sill Plates
- √Sealing and Insulating around an Attic Hatch
- √Sealing Interior and Exterior Gaps and Cracks
- √Sealing Around Plumbing Penerations
- √Sealing Under Eaves
- Article | IP Ratings Learn more about what an IP rating is and how this rating system is used.
https://www.rdfasteners.com/cs_wiki/wiki/47-ingress-...