Estimated Availability Date:
Call for Availability : 403-342-6030
Cartridges for use with 5500 and 7700 Series half masks, and 5400 and 7600 Series full facepieces
- Organic Vapor Cartridge
Key Features
Cartridges and filters for use with 5500 and 7700 Series half masks, and 5400 and 7600 Series full facepieces. Combination filter cartridges feature a low profile with curved top that will not catch on pipes or other objects. Easy to perform user seal checks, even on thegas and vapor cartridges.
Recommended Industries/Use
- Chemical
- Government
- Manufacturing
- Oil and Gas
Hazards
- Airborne Particulates
- Chemical
- Confined Space
- Contamination
Regulations
- Regulation - NIOSH certified when used with North facepieces.
Historical Brand
North
Warranty Information
Honeywell Safety Products warrants these cartridges and filters to the original owner to be free from defects in materials and workmanship for a period of one (1) year from the date of original shipment from Honeywell"s factory. Honeywell"s obligation under this warranty will be, at Honeywell"s option, to repair or replace without charge the cartridge or filter, or any of its components found by Honeywell to have been defective during the warranty period, under the following terms:1) The warranty claim is made (i) by the owner who purchased this cartridge or filter new from Honeywell or an authorized Honeywell Distributor, and (ii) not more than three (3) months after the end of the warranty period. 2) This cartridge or filter or component is found by Honeywell to have been defective in normal use and service during the warranty period of one (1) year from the date of purchase by the owner. 3) This cartridge or filter, or component is returned freight prepaid to Honeywell, either to its factory or to a Honeywell authorized service center, and is thereafter returned to the owner freight collect. 4) This warranty does not apply to (i) any respirator or component found by Honeywell to have become defective as a result of any accident, alteration, misuse, abuse, or servicing with parts not approved by Honeywell; or (ii) deterioration or aging of any component made of rubber or other elastomer since such components can be adversely affected by undue exposure to heat, sun, water, chemicals, ozone or other deteriorating elements; (iii) ) facepiece lens, compressed-air cylinders and parts that become defective through normal use. The decision as to what constitutes normal use shall be made solely by HONEYWELL SAFETY PRODUCTS. 5) To maintain this warranty, the purchaser must perform maintenance and inspections as set forth in the Instruction Manual which shall include prompt replacement or repair of defective parts, and replacement of parts per the maintenance schedule as set forth in the User"s Instructions. THE OWNER ASSUMES ALL OTHER RISKS, IF ANY, SUCH AS THE RISK OF ANY DIRECT, INDIRECT OR CONSEQUENTIAL LOSS OR DAMAGE ARISING OUT OF THE USE OF, OR INABLILTY TO USE, THE PRODUCT. SERVICING HONEYWELL SAFETY PRODUCTS RESPIRATORS WITH PARTS NOT APPROVED BY HONEYWELL WILL VOID THIS WARRANTY AND THE NIOSH APPROVAL FOR THE RESPIRATOR UNIT. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED AND MAY NOT BE VARIED OR EXTENDED EXCEPT IN WRITING BY AN AUTHORIZED OFFICIAL OF HONEYWELL SAFETY PRODUCTS
Specifications
Cartridge Shell Material | Polystyrene | ||
Filtration | N95, R95, N99 and P100 | ||
Sorbent Material | Meets testing requirements of NIOSH 42 CFR Part 84 |
Approximate Item/Package Dimensions in inches
- Width: 2.5
- Height: 1.75
- Depth: 6
Approximate Item/Package Weight in pounds
- Weight: 0.33
Vendor Part #: | NTHN75001 |
- Article | IP Ratings Learn more about what an IP rating is and how this rating system is used.
https://www.rdfasteners.com/cs_wiki/wiki/47-ingress-...