H. Paulin & Co. WASHER 38 LOCK INT TOOTH
WASHER 38 LOCK INT TOOTH
* WASHER 38 LOCK INT TOOTH
WASHER 38 LOCK INT TOOTH 
Product #: LWI006
Shipping calculation is unavailable at this time. Please call 403-342-6030 for a quote.
Pls.Call
Available Online: 0
Pre Order Item
Estimated Availability Date:
Estimated Availability Date:
Availability in Store:
We're low on this Washer. Please Call for Availability : 403-342-6030
QTY: 
BUY DIRECT
Product Description
WASHER 38 LOCK INT TOOTH
- Lock Washer: Lock Washers are built to prevent a bolt or nut from loosening after it has been tightened. When a bolt or nut is used with this kind of washer between the surface being bolted to, the washer uses either compression with a spring force or interlock and bite to lock the bolt or nut in place. This helps to prevent vibration from loosening the bolt or nut and causing the joint to lose strength.
- Toothed Lock Washer: A toothed lock washer is comprised of a bunch of small sharp teeth either around the inner diameter, the outer diameter or both. The function of the teeth is to bite into the fastener and the material it is up against and stop the fastener from coming loose due to movement or vibration.
| * | The information provided for this product has been bulk uploaded for general information only, and should not be relied upon or used as the sole basis for making decisions without consulting primary, more accurate, more complete or more timely sources of information. Please do not complete an order with this product unless you first confirmed by the vendor part number or the Red Deer Fasteners' product number. Any reliance on the material associated with this product is used at your own risk. |
Product Specifications
| Vendor Part #: | 161-220 |
- Article | IP Ratings Learn more about what an IP rating is and how this rating system is used.
https://www.rdfasteners.com/cs_wiki/wiki/47-ingress-...
