WASHER 138 LOCK GR8 SPRIN
WASHER 138 LOCK GR8 SPRIN - SPRING LOCK WASHER GR8 - *BARE METAL
* WASHER 138 LOCK GR8 SPRIN
WASHER 138 LOCK GR8 SPRIN - SPRING LOCK WASHER GR8 - *BARE METAL 
Product #: LWB022G8
Shipping calculation is unavailable at this time. Please call 403-342-6030 for a quote.
Pls.Call
Available Online: 0
Pre Order Item
Estimated Availability Date:
Estimated Availability Date:
Availability in Store:
We're low on this Washer. Please Call for Availability : 403-342-6030
QTY: 
BUY DIRECT
Product Description
WASHER 138 LOCK GR8 SPRIN - SPRING LOCK WASHER GR8 - *BARE METAL
- Lock Washer: Lock Washers are built to prevent a bolt or nut from loosening after it has been tightened. When a bolt or nut is used with this kind of washer between the surface being bolted to, the washer uses either compression with a spring force or interlock and bite to lock the bolt or nut in place. This helps to prevent vibration from loosening the bolt or nut and causing the joint to lose strength.
- Split Lock Washers: These lock washers are made with a split where the ends are slightly uneven from each other. When compressed, the split ends bite into either the head of a bolt or the nut depending on how it is used, this helps to prevent the bolt or nut from loosening.
| * | The information provided for this product has been bulk uploaded for general information only, and should not be relied upon or used as the sole basis for making decisions without consulting primary, more accurate, more complete or more timely sources of information. Please do not complete an order with this product unless you first confirmed by the vendor part number or the Red Deer Fasteners' product number. Any reliance on the material associated with this product is used at your own risk. |
Product Specifications
| Vendor Part #: | LWB022 |
- Article | IP Ratings Learn more about what an IP rating is and how this rating system is used.
https://www.rdfasteners.com/cs_wiki/wiki/47-ingress-...
