Senco Collated Wood Screw - #8 - Rex/Pam / YELLOW ZINC
INTERIOR - Wood to Wood - Flat Head - Sharp Point - Double Thread - Rex Drive - For interior wood to wood applications, subflooring, and framing
Collated Wood Screw - #8 - Rex/Pam / YELLOW ZINC
INTERIOR - Wood to Wood - Flat Head - Sharp Point - Double Thread - Rex Drive - For interior wood to wood applications, subflooring, and framing 
Product #: SEN08F175YKX
Shipping calculation is unavailable at this time. Please call 403-342-6030 for a quote.
Options: DIA.: #8; Length: 1-3/4"; Pkg: Jug 1000
Info:
Pls.Call
Available Online: 0
Pre Order Item
Estimated Availability Date:
Estimated Availability Date:
Availability in Store:
Call for Availability : 403-342-6030
QTY: 
BUY DIRECT
Product Description
Sharp Point, Interior Wood Screw
STEEL – HEAT TREATED
✔ Yellow Zinc
*1000/Tub
Built for interior wood to wood applications, subflooring and framing!
Build
- Asymmetric double thread design reduces installation time while improving holding power
- Rex drive recess provides smooth engagement with high torque transmitting capability reducing operator fatigue, and extending bit life
- Flat head provides strong holding power for wood applications
- Ultra sharp point quickly penetrates wood reducing drive time
Installation Notes
- Use a screwdriver with a torque controlled or precise depth-sensitive clutch and speeds of up to 5000 RPM
- Over-driving may cause a weak connection or thread strip-out
- The drive is finished when the screw is just below the work surface
Fastener Properties
Certifications
| ASTM B117 Salt Spray Test |
Technical Specifications
| Ultimate Tensile (lbs) | Torsinal Strength (lbs-in) |
| 2010 | 88 |
- Flat Head: A flat head has a flat top with a countersunk bearing surface. It's available with 4 lugs to assist with countersinking, and useful for general purpose construction.
- Decking Screw: A decking screw is a specialized fastener designed to resist corrosion from adverse outdoor environmental conditions.
- Collated Screws: Collated Screws are fasteners connected together with holding strip. They're built to work in conjunction with a collated screw gun system to drive the fastener into a hard surface. These screws are usually used in drywall installation, deck building, framing and more.
Product Specifications
| Vendor Part #: | 08F175YKX |
| Screw Drive Type: | Rex/Pam |
| Finish: | Yellow Zinc |
| Head Diameter: | 0.32 inches |
| Head Height: | 0.18 inches |
| Head Type: | Flat |
| Material: | Steel |
| Point Type: | Sharp Point |
| Screw Gauge: | #8 |
| Screw Length: | 1-3/4 inches |
| Screw Thread: | 2/3 Double |
| Tensile Strength (max): | 2010 lbs |
| Thread Count: | 10 TPI |
| Thread Length: | 1.17 inches |
| Thread Type: | Double |
| Torsional: | 88 lbs-in |
Product Document
- √Wood to Wood Applications
- √Interior Applications
- √Framing
- √Subflooring
- Article | IP Ratings Learn more about what an IP rating is and how this rating system is used.
https://www.rdfasteners.com/cs_wiki/wiki/47-ingress-... - Product | Personal Protection See our selection of personal protection products to keep you safe no matter the hazard!
https://www.rdfasteners.com/4070-Personal-Protection
