Framing Nailer (w/o Acc) - 1-1/2" - 35° / MCN150 *STRAPSHOT
Estimated Availability Date:
Call for Availability : 403-342-6030
No customer reviews for the moment.
The Bostitch Strapshot™ Metal Connector Nailer is built to secure metal framing hardware.
Build
This framing nailer is built specifically to install metal framing hardware from strapping, joist hangers, hurricane ties, rafter ties and connectors, post bases and caps, to anchors.
The compact size of this nailer allows it to get into hard to reach spaces. This nailer can fit between 12" O.C. joists.
Get fast and precise control from the exposed nail tip which allows you to place the nail directly into the hole of whatever hardware you're securing.
Drives 1-1/2" paper tape collated metal connector nails!
Safety
Operators and others need to wear safety glasses with side shields when operating this tool.
Keep fingers away from trigger when not driving fasteners to prevent accidental firing.
Low nail lockout prevents dry fires.
- Framing Nailers: Power tools built to drive corrugated nails usually into wood, but can also be used with various other materials. Can also be referred to as a nail gun or nailgun.
| Vendor Part #: | MCN150 |
| Fastener Length: | [1-1/2 inches] |
| Fastener Type: | 35 Degree Paper Metal Connector |
| Firing Mode: | Sequential w/ Contact Trigger Included |
| Height: | [10.5 inches] |
| Length: | [11.5 inches] |
| Magazine Loading: | Bottom Load |
| Operating Pressure: | [80 - 120 psi] |
| Weight: | [4.6 lbs] |
| Dry Fire Lockout: | Yes |
| Collation Type: | Paper |
| Jam Clearance: | Yes |
| Magazine Angle: | 35° |
| Magazine Capacity: | 29 |
| Power Source: | Pneumatic |
- √For Securing Metal Framing Hardware
- Article | IP Ratings Learn more about what an IP rating is and how this rating system is used.
https://www.rdfasteners.com/cs_wiki/wiki/47-ingress-...
