U2 Fasteners Structural Screws - Dome - 5/16" - Torx / CR6+
Dome Head - Torx Drive - Carbon Steel - Case Hardened - CR6+ Free Coating - Tapper Point - Talon Grip - Reamer Thread - For replacing lag screws in construction applications
Structural Screws - Dome - 5/16" - Torx / CR6+
Dome Head - Torx Drive - Carbon Steel - Case Hardened - CR6+ Free Coating - Tapper Point - Talon Grip - Reamer Thread - For replacing lag screws in construction applications 
Product #: U2FS20102500B
Shipping calculation is unavailable at this time. Please call 403-342-6030 for a quote.
Options: Length: 6"
Info:
Pls.Call
Available Online: 0
Pre Order Item
Estimated Availability Date:
Estimated Availability Date:
Availability in Store:
Call for Availability : 403-342-6030
QTY: 
BUY DIRECT
Product Description
Construction Screws
CARBON STEEL - CASE HARDENED
✔Hexavalent Chromium CR6+ Free Coating
✔Dome Head with Talon Grip
✔Torx 30
✔Tapper Point w/ Cork Screw Start & Blade Cutting Thread
*BULK
These screws are built to replace lag screws and can be installed with one hand!
- CR6+ is an environmentally friendly plating method and has superior corrosion protection
- The dome head enhances the structural capability
- Tapper point consists of the corkscrew start with blade cutting thread for easy piercing while alleviating strain on the material
- Torx drive grasps the driver bit tightly and can be installed with one hand
- Talon grip holds the screw tight to prevent loosening and uses its nibs to dig into the material when countersunk
- Reamer thread enlarges the hole in the material to create a larger passage when drawing materials together and reduces tension on the screw head
- For use in professional timber construction, staircases, deck frames, rafter, trellis framing, ledger boards, joists, planter boxes, post supports, play-set structures, retaining walls, facade attachments, and more
Fastener Properties
Certifications
| IAPMO-UES ER-454 |
- Structural Screws: Structural screws are built for heavy-duty construction projects. These screws often take the place of other more traditional fasteners and typically have more advanced features.
Product Specifications
| Vendor Part #: | S20102500B |
| Coating: | CR6+ Free |
| Diameter: | [5/16 inch] |
| Head Type: | Dome |
| Material: | Carbon Steel |
| Point Type: | Tapper |
| Thread Type: | Blade Cutting with Reamer |
Product Document
- √for Wood
- √General Indoor and Outdoor Construction
- Article | Structural Screws vs Lag Screws Learn the differences between Structural Screws and Lag Screws.
https://www.rdfasteners.com/cs_wiki/wiki/1048-struct... - Article | IP Ratings Learn more about what an IP rating is and how this rating system is used.
https://www.rdfasteners.com/cs_wiki/wiki/47-ingress-...
A few things you may need
