Bosch Power Tools Rotary Hammer Drill Bit - 5/8" - SDS-Max® / HCFC502 Series *SPEEDXTREME™
100% Carbide Head - Diffusion Bonded - Four-Flute - Four-Cutter - Wear Mark Indicator - 5x Life in Rebar - For drilling holes in reinforced concrete and hard aggregate
100% Carbide Head - Diffusion Bonded - Four-Flute - Four-Cutter - Wear Mark Indicator - 5x Life in Rebar - For drilling holes in reinforced concrete and hard aggregate
Product #: BSAHCFC5020
Shipping calculation is unavailable at this time. Please call 403-342-6030 for a quote.
Options: DIA.: 5/8"; Overall L.: 13"
Info:
Pls.Call
Available Online: 0
Pre Order Item
Estimated Availability Date:
Estimated Availability Date:
Availability in Store:
Call for Availability : 403-342-6030
QTY:
BUY DIRECT
Product Description
The Bosch SDS-Max® SpeedXtreme™ Rotary Hammer Drill Bits are built for drilling holes in reinforced concrete and hard aggregate.
Build
Each of these SpeedXtreme™ SDS-Max® rotary hammer drill bits are made with a 100% carbide cutting tip that is diffusion bonded to the steel bit at the molecular level resulting in extreme wear resistance and strength.
These bits have a four-cutter head with a 180° cutting diameter and deliver 100% power transfer during drilling.
The active-centering tip results in a rounder hole, while the four 90° side angles create a wide, sharp head that makes precise holes.
The four-flute construction aggressively pulls dust away from the work, for fast drilling and longer bit life.
Built to last 5x longer than competitive bits!
- Drill Bits: A metal rod of varying length and diameter that is used to drill holes in various materials and is designed to help draw the cut material out of the hole.
- Hammer Bits: A steel rod that has flutes down the length of the shaft with a carbide tip for cutting into masonry materials. The bit is heat-treated to provide strength so it can withstand the hammering action when used in hammer drills.
Product Specifications
Vendor Part #: | HCFC5020 |
Application: | Concrete and Hard Aggregate |
Bit Diameter: | 5/8 inch |
Body Material: | Steel |
Shank Type: | SDS-MAX |
Tip Material: | Carbide |
Tip Style: | Four-Cutter |
- √for Drilling Concrete
- √for Drilling Hard Aggregate
- Article | IP Ratings Learn more about what an IP rating is and how this rating system is used.
https://www.rdfasteners.com/cs_wiki/wiki/47-ingress-... - Product | Dust Collection Accessories See our selection of dust collection accessories that can help you comply with OSHA standards!
https://www.rdfasteners.com/3846-Power-Tool-Dust-Col... - Product | Personal Protection See our selection of personal protection products to keep you safe no matter the hazard!
https://www.rdfasteners.com/4070-Personal-Protection