Flat Washers - S.A.E. - Low Carbon Steel / Plain
Bare / No Finish - For various functions when assembled between the bearing surface of a fastener and the part being attached
Flat Washers - S.A.E. - Low Carbon Steel / Plain
Bare / No Finish - For various functions when assembled between the bearing surface of a fastener and the part being attached 
Product #: FWB012SAE
Shipping calculation is unavailable at this time. Please call 403-342-6030 for a quote.
Options: For Bolt Dia.: 3/4"
Info:
Pls.Call
Available Online: 0
Pre Order Item
Estimated Availability Date:
Estimated Availability Date:
Availability in Store:
This item is sold in multiple of 100.
Minimal order quantity for this item is 50.
Call for availability. : 403-342-6030
QTY: 
BUY DIRECT
Product Description
Steel Flat Washers - S.A.E.
√ STEEL - FOR EXTRA STRENGTH
Bare/Plain
ANSI/ASME B18.22.1
LOW CARBON STEEL
- For distributing the load between the fastener and the bearing surface
- Helps to ensure the tightness of fasteners and aid in preventing them from loosening
- Relieves friction between fastener and fastening material
THICKNESS RANGE
- #2: 0.20"
- #4: 1/32"
- From #6 to #10: 3/64"
- From #12 to 7/16": 1/16"
- From 1/2" to 5/8": 3/32"
- From 3/4" to 1-1/8": 9/64"
- 1-1/4": 5/32"
- From 1-1/2" to 2": 3/16"
- Platings, Coatings & Finishes: There are a variety of coatings and platings that can be used in the prevention or delaying corrosion in fasteners. Platings and coatings can also enchance or change the physical look of nuts, bolts and washers for projects that require specific aesthetic care.
- SAE: Acronym, Society of Automotive Engineers. The SAE is a professional engineering society whose objectives are to develop and promote standards in the automotive, aerospace and commercial / heavy duty vehicle industries.
- Bare / Plain Finish: Uncoated steel is cost-effective and suitable for indoor applications or in environments where environmental factors will not cause corrosion or rust.
- Flat Washers: Washers built to distribute the load and reduce friction and heat when being tightened between a nut, bolt, or screw.
Product Specifications
| Vendor Part #: | FWB004SAE |
| Grade: | 2 |
| Material: | Low Carbon Steel |
| Plating: | Bare / Plain |
- √Preventing Fasteners from Loosening
- √Distributing Load
- √Barrier Between Materials
- Product | Explore Nut, Bolt & Washer Specifications Browse Fastener Standards, Materials Specification and Thread Designations to find the product you need
https://www.rdfasteners.com/6993-Explore-Nut-Bolt-Wa... - Article | IP Ratings Learn more about what an IP rating is and how this rating system is used.
https://www.rdfasteners.com/cs_wiki/wiki/47-ingress-...
