Jet Equipment & Tools 8 Piece Punch & Chisel Set / 775507
Highest grade carbon steel - Powder coated shank - Edges accurately tempered - Extra-thick hexagonal shanks
8 Piece Punch & Chisel Set / 775507
Highest grade carbon steel - Powder coated shank - Edges accurately tempered - Extra-thick hexagonal shanks 
Product #: JET775507
Shipping calculation is unavailable at this time. Please call 403-342-6030 for a quote.
Pls.Call
Available Online: 0
Pre Order Item
Estimated Availability Date:
Estimated Availability Date:
Availability in Store:
Call for Availability : 403-342-6030
QTY: 
BUY DIRECT
Jet Equipment & Tools is part of SureWerx™ Group supplying only professional grade tools, equipment and safety gear since 1957, earning the trust of Canadian workers. No customer reviews for the moment.
Product Description
The JET 8 Piece Punch & Chisel Set (775507) is made of the highest grade carbon steel that was accurately hardened and tempered preventing splintering and extending life.
This tool is built with a powder coated shank that protects against rust, and its edges are
accurately tempered to stay sharp.
It's ideal for clearly marking metal in work layout and making indentations in a workpiece before drilling.
The extra-thick hexagonal shanks minimize roll away.
The working ends are accurately ground to a correct 90° included angle , and the striking end hardened to HRC-42 maximum, so it won’t chip or mushroom.
This tool meets Canadian Government Specifications CDA39GP-43a.
The following is included with this kit:
WARNING: Always Use Punches and Chisels on Materials Softer than the Hardness of the Punch Itself
WARNING: Always Wear Safety Goggles
This tool is built with a powder coated shank that protects against rust, and its edges are
accurately tempered to stay sharp.
It's ideal for clearly marking metal in work layout and making indentations in a workpiece before drilling.
The extra-thick hexagonal shanks minimize roll away.
The working ends are accurately ground to a correct 90° included angle , and the striking end hardened to HRC-42 maximum, so it won’t chip or mushroom.
This tool meets Canadian Government Specifications CDA39GP-43a.
The following is included with this kit:
- Cold Chisel: 1/2, 5/8, 3/4"
- Centre Punch: 5/32"
- Solid Punch: 3/16"
- Pin Punch: 1/8, 3/16, 1/4"
- Terylene Pouch
WARNING: Always Use Punches and Chisels on Materials Softer than the Hardness of the Punch Itself
WARNING: Always Wear Safety Goggles
Product Specifications
| Vendor Part #: | 775507 |
| Pieces: | 8 |
- √Indenting Metal
- √Marking Metal
- Article | IP Ratings Learn more about what an IP rating is and how this rating system is used.
https://www.rdfasteners.com/cs_wiki/wiki/47-ingress-...
