Wedge Anchor - 3/4" - Zinc Plated Carbon Steel / WED
UCAWED3410 UCAWED347 UCAWED34812Estimated Availability Date:
Call for Availability : 403-342-6030
UCAWED3410 UCAWED347 UCAWED34812
For over 50 years, UCAN has specialized in producing and distributing concrete anchors and other fastening products. UCAN strives to provide the most practical and cost effective solutions to meet the needs of engineers, contractors, and tradesmen.
No customer reviews for the moment.
UCAN Wedge Anchors are made to the highest quality standards. UCAN Fastening Products are strictly quality-controlled to assure consistent performance.
Built with a Category 1 Classification, these wedge anchors are resistant to static, wind and seismic tension, as well as shear loads in cracked and uncracked normal weight concrete that has a specified compressive strength between 2500 psi and 8500 psi.
UCAN wedge anchors are fully threaded, zinc plated carbon steel anchors.
Assembled with a unique 3 segment clip, they include a nut and washer.
These wedge anchors re built with a long thread and have letter coded studs.
They're IAPM ES® Listed ER-0373 and has been tested in accordance with AC 193 (from Ø3/8" to 3/4).
Please Note: Not recommended for use in concrete less than 21 days old.
| Vendor Part #: | WED3410 |
| Material: | Carbon Steel |
| Max Installation Torque: | [110 ft. lbs.] |
| Plating: | Zinc |
- √Brick Shelf Angles
- √Cable Trays
- √Curtain Wall
- √Mechanical Equipment
- √Pipe Support
- √Seating
- √Steel Base Plates
- √Storage Racking
- √Tilt-Up Braces
- More Info | UCAN Fastening Products UCAN specializes in producing and distributing concrete anchors and other fastening products.
ucanfast.com - Article | IP Ratings Learn more about what an IP rating is and how this rating system is used.
https://www.rdfasteners.com/cs_wiki/wiki/47-ingress-...
