Dual-Bevel Glide Miter Saw - 10" - 15.0 A / CM10GD Series
BSTCM10GDEstimated Availability Date:
Call for Availability : 403-342-6030
BSTCM10GD
Robert Bosch GmbH is the largest power tool and accessory manufacturer in the world, Bosch provides a complete line of corded and cordless power tools. No customer reviews for the moment.
The Bosch 10” Dual-Bevel Glide Miter Saw is built to take up less room than a traditional sliding miter saw.
Build
Bosch’s 10” glide miter saw delivers complete cutting control and accuracy angles up to 60°.
This saw is built with Bosch’s Axial-Glide System that provides wider cross-cuts, enhanced alignment, and smoother glide, all while taking up to 10” less space front-to-back than a sliding miter saw.
This saw has a 12” horizontal cut capacity and up to 6” vertical cut capacity when the material is nested against the fence.
Dust collection vacuum compatible!
Power
The powerful 15-amp motor produces a no-load speed of 4,800 RPM allowing for high cut capacities.
Safety
The bevel lock lever is located at the front, eliminating the need to reach around behind the saw in order to make adjustments, making it safer and easier to line up your cuts.
In the Box
The following is included in the Saw with Floor Stand option (BSTCM10GDXTRA):
- (1) 10” Glide Miter Saw (CM10GD)
- (1) T4B Floor Stand
- (1) 10” 60-Tooth Carbide-Tipped Saw Blade
- (1) Wrench
- (1) Work Clamp
- (1) Dust Bag
- (1) Vacuum Adapter/Elbow
The following is included in the TOOL ONLY option (BSTCM10GD):
- (1) 10” Glide Miter Saw (CM10GD)
- (1) 10” 60-Tooth Carbide-Tipped Saw Blade
- (1) Wrench
- (1) Work Clamp
- (1) Dust Bag
- (1) Vacuum Adapter/Elbow
- Miter Saw: A specialized cutting tool that allows you to make cuts at different angles. These saws are ideal for cutting wood, moldings, baseboards, casings and more.
| Vendor Part #: | CM10GD |
| Amperage Measurement: | [15.0 amps] at [120 V] |
| Bevel Stops: | [0 degrees], [33.9 degrees] & [45 degrees] |
| Blade Capacity - Diameter: | [10 inches] |
| Cord Length: | [6 ft.] |
| Max Bevel Angle: | [45 degrees] |
| Max Miter Angle: | Left [52 Degree], Right [60 Degree] |
| Miter Positive Stops - Left: | 0°, 15°, 22.5°, 31.6°, 45° |
| Miter Positive Stops - Right: | 0°, 15°, 22.5°, 31.6°, 45° |
| No Load Speed: | [4800 RPM] |
| Overall Height: | [20.5 inches] |
| Overall Length: | [32 inches] |
| Voltage: | [120 Volt] |
| Weight: | [64 lbs.] |
- √Crosscutting
- √Finish & Trim Work
- √Trim & Moldings
- √Moldings & Decorative Trim
- Product | Circular Saw Blades Circular Saw Blades are toothed or abrasive discs built to spin around an arbor in a rotary motion.
https://www.rdfasteners.com/428-Saw-Blades-Circular-Saw - Article | IP Ratings Learn more about what an IP rating is and how this rating system is used.
https://www.rdfasteners.com/cs_wiki/wiki/47-ingress-... - Product | Personal Protection See our selection of personal protection products to keep you safe no matter the hazard!
https://www.rdfasteners.com/4070-Personal-Protection
