2 Tool Combo Kit - 20V Li-Ion / DCK299P2 *MAX XR™
Estimated Availability Date:
Call for Availability : 403-342-6030
DEWALT is a leader in contractor power tools including cordless drills, woodworking tools and professional power tools. No customer reviews for the moment.
The DeWalt MAX XR™ 2 Tool Combo ½” Hammer Drill and ¼” Impact Driver Kit is built as a high power tool set that is compact and can fit into tight areas.
Build
20V MAX XR™ Extreme Runtime Premium Li-Ion 5.0Ah batteries supply up to 60% more runtime per charge than standard 20V MAX™ li-ion batteries. LED fuel gauge on battery gives immediate info on charge level, so there’s no guessing on how much power you have left. Get more power and a considerably longer run-time with these batteries.
Charger has a hot/cold charge delay and will start charge once battery is at optimal temperature. This feature keeps the batteries working in prime condition and helps reduce electrical shocks and fires.
Takes about 1 hour to charge the 20V MAX XR™ Extreme Runtime Premium Li-Ion 5.0Ah batteries with the included charger, helping to keep downtime to a minimum.
Motor
20V MAX XR™ Extreme Runtime tools are built with a brushless motor making them cooler running, while giving them double the runtime of brushed motors, PLUS, they are up to 38% lighter and 57% faster than other 18V li-ion tools, making these tools better for operator health and all day use.
20V MAX XR™ ½” Brushless Hammer Drill (DCD996B)
Is built for hammer drilling, drilling and screwdriving in dry conditions and delivers 820 UWO of maximum power. Has an ultra-durable and heavy-duty ½” ratcheting nitro-carburized metal chuck that has carbide inserts giving this chuck the best bit grip possible.
Drill has a variable speed trigger built to help the operator keep control of the drill, and to make it easier to start drilling without the bit slipping or the tool twisting. Equipped with a break, the drill will stop rotating when the trigger is released, and also has a forward, reverse and lock control button for extra safety.
Has a built-in light that will power on when the trigger is activated. Three light modes can be selected with a switch located on the foot of the drill. Low, medium and spotlight modes allow for optimum lighting control of your work area. The low and medium modes will shut off 20 seconds after the drill stops running. The spotlight mode stays on for 20 minutes after tool is stopped to act as a flashlight and help you continue to see what you are working on.
Has an electronic, fully adjustable, 11 torque settings screwdriver option. This makes it possible to drive and remove a huge selection of fastener sizes. Also comes with 3 speeds: Speed 1 is the highest speed setting and provides the greatest amount of torque where speed 3 is the lowest. Speed 1 does 0 - 2,000 RPM, speed 2 does 0 - 1,300 and speed 3 does 0 - 450 RPM.
The side handle has 360° rotation capabilities to accommodate all users and provide greater control over the drill.
Maximum Recommended Capacities for Hammer Drill (DCD996)
| WOOD | ||
| Auger | 1-1/4” (32 mm) | |
| Paddle | 1-1/2” (38 mm) | |
| Twist | 1/2” (13 mm) | |
| Self-Feed | 2-9/16”” (65 mm) | |
| Hole Saw | 4” (100 mm) | |
| METAL | ||
| Twist | 1/2” (13 mm) | |
| Hole Saw | 1- 3/8” (35 mm) | |
| MASONRY | ||
| Carbide | 1/2” (13 mm) |
20V MAX XR™ 1/4” Brushless Impact Driver Drill (DCF887B)
Built for impact screwdriving and to be super compact for driving fasteners into wood, metal and concrete in the tightest of spaces.
Drill has a variable speed trigger built-in to help the operator keep control of the drill, and to make it easier to start drilling without the bit slipping or the tool twisting. Equipped with a break, the drill will stop rotating when the trigger is released, and also has a forward, reverse and lock control button for extra safety.
Use ¼” hex accessories with this impact driver drill. Will accept 1” long hex bits, allowing the tool to be as compact as possible for those crammed work spaces.
Has three modes that allow you to control the torque of the tool where the trigger adjusts the speed. Mode 1 is Precision Drive which slows down the drill once the screw head reaches the work piece, then it will go into a slow controlled drive to make sure the head is totally flush with the work surface, leaving a perfect unmarred finish at 0-1,000 RPM. Mode 2 is Normal Impacting at 0-2,800 RPM, and Mode 3 is High Speed Impacting at 0-3,250 RPM.
Impact Driver (DCF887) Maximum Torque Capabilities
| Mode | Ft./Lbs. | In./Lbs. | Nm |
| 1 | 20 | 240 | 27 |
| 2 | 125 | 1500 | 170 |
| 3 | 152 | 1825 | 205 |
Comes with a 3 year limited warranty, 1 year free service and a 90 day money back guarantee.
The following is included in this kit:
- (1) 20V MAX XR™ ½” Brushless Hammer Drill (DCD996B)
- (1) 20V MAX XR™ 1/4” Brushless Impact Driver Drill (DCF887B)
- (2) 20V MAX XR™ 5.0 Ah Premium Li-Ion Battery Pack (DCB205)
- (1) 12 - 20V MAX™ Battery Charger (DCB101)
- (1) 360° Side Handle
- (2) Belt Hooks
- Plastic Carrying Case
- Li-Ion: Li-Ion (or lithium-ion) batteries are rechargeable batteries. Li-Ion batteries are built to with a high energy density and only allow a slow loss of charge when not in use. Li-Ion batteries are the most popular batter type for consumer goods, but are also popular in the aerospace, military, electric vehicle industries.
| Vendor Part #: | DCK299P2 |
| Battery: | [20 Volt] ([5.0 Ah]) Li-Ion |
| Battery Chemistry: | Lithium-Ion |
| Chuck Build: | Metal Single Sleeve |
| Chuck Type: | Keyless |
| LED Light: | Built Into Handle |
| Motor: | Brushless |
- √On the Jobsite
- Article | IP Ratings Learn more about what an IP rating is and how this rating system is used.
https://www.rdfasteners.com/cs_wiki/wiki/47-ingress-...
