This Makita LXT™ 2 Tool Combo Kit (LXT217) is built to provide the power needed for all drilling needs where compactness and lightness are essential.

Power

Powered by an 18V (3.0 Ah) Li-Ion Battery Pack (BL1830). These Li-Ion batteries run longer and have more charge cycles than Ni-CAd and Ni-MH batteries.

The battery has a memory chip inside, that communicates with the charger, to help control the charging process and keep the battery cool.

Built with LXT™ which stands for lithium extreme technology, indicating Makita's line of lithium powered tools and batteries.

Build

LED light in the handle helps to illuminate the work area.

XPT™ extreme protection technology is a labyrinth construction of paths built within the armature that help prevent dust, debris, and liquids from entering the tool protecting the longevity of the tool.

There are conveniently accessible replaceable carbon brushes inside the motor to extend the life of the drill.

Built ergonomically to help reduce fatigue.

1/2" Heavy Duty Driver Drill (LXFD03Z)

The power switch has forward, neutral and reverse functions.

Comes with a speed lever that has 2-speed controls: Speed 1 has a no load speed of 0-400 RPM; Speed 2 has a no load speed of 0-2,000 RPM.

Action mode changing ring can be rotated to change the drill into driver or drilling mode.

Adjustment ring has 21 settings for adjusting torque to drive screws for any project sufficiently.

Built-in LED battery charge indicator lets you know the amount of charge left in the battery, all with a simple touch of a button on the drill.

Side grip is fully adjustable and can be clamped on in any direction for ease of use.

Convenient bit holder and hanging hook are made attachable to either side of the tool.

Overall length is 8-7/8" and drill only weighs 5 lbs.

1/4" Impact Driver (DTD152)

Device speed can be adjusted by how much pressure you apply to the power trigger.

Has a reversing switch lever that also goes into neutral mode preventing the trigger from being able to be depressed.

The impact driver has a no load speed of 0-2,900 RPM and 0-3,500 IPM.

Push in driver bit into the sleeve as far as it can go to install the bit. To remove, pull the sleeve away from the drill and pull out the bit.

Overall length is 5-3/8, 18 volt" and the impact drill only weighs 3.3 lbs.

7.2-18V Rapid Battery Charger (DC18RC)

Charges Li-ion or Ni-MH 18-volt batteries.

When finished charging red light will turn green, and the charger emits a sound to indicate charge is complete. There are several sound options including mute to choose from.

Has a built in cooling fan system that will cool the battery before it will charge it.

The battery conditioning function helps to extend the life of the battery by optimizing the charge based on temperature or if the battery has been over-discharged.

The following is included with the kit:

• (1) 1/2" Heavy Duty Driver Drill (DDF458)
• (1) 1/4" Impact Driver (DTD152)
• (2) 18V (3.0 Ah) Li-Ion Battery Packs (BL1830)
• (1) 7.2-18V Rapid Battery Charger (DC18RC)
• (1) Plastic Carrying Case
• (1) Side Handle
• (1) Bit Holder
• (2) Hanging Hooks
• (2) Double Ended No. 2 Philips/Slotted Drill Bits