Small Flap Wheels - Aluminum Oxide - 2" Dia. / KM 613
Estimated Availability Date:
Call for Availability : 403-342-6030
Since 1893, Klingspor has been a leader in innovating abrasives and they develop leading-edge coated abrasives, cutting, and grinding discs.
Their mission is to supply highly efficient products of excellent quality, superior customer service, maximum safety, and do right by the environment. They operate globally and are committed to the social responsibilities of international companies.
No customer reviews for the moment.
The Klingspor 2" Diameter small coated abrasive flap wheels (or abrasive mops) use a Resin Bonding Agent and Aluminum Oxide Grain.
Built for use on steel and stainless steel materials.
With their fan-shaped radial design these flap wheels ensure an even removal rate.
Suitable for use in hard-to-reach areas!
Application Info
These small abrasive flap wheels are built to be used with stroke grinders, flexible shaft grinders and drilling machines.
Built with an optimum performance cutting rate of 20 to 25 m/s. Cut between these speeds to receive optimal efficiency in regards to tool wear, stock removal, surface finishing and thermal load of the workpiece.
Better Grinding
Increase your stock removal by using a rougher grit NOT by increasing grinding pressure! Increasing your tool grinding pressure can cause:
- Excessive tool wear and tear
- Increased workpiece temperature load
- Tool Failure!
For more info please see product packaging. Klingspor provides all essential safety information with the product.
- Coated Abrasives: A coated abrasive is an assembly of abrasive grains fixed with an adhesive to a backing material such as resin, rubber, polyester, paper, or cloth.
- Abrasive Drums / Wheels: Abrasives built in the shape of a drum, with or without a mandrel, to produce fine and consistent finishes on metals.
| Vendor Part #: | 212-FW60 |
| Bonding Method: | Resin |
| Diameter: | [2 inches] |
| Grain: | Aluminum Oxide |
| Max Operating Speed: | [40 m/s] |
| Max Revolutions Per Minute: | [25000 RPM] |
| Shaft Diameter: | [1/4 inch] |
- √Grinding Metal
- √With flexible shaft grinders
- √With stroke grinders
- √With drilling machines
- √Mould making
- √On fittings
- √Grinding pipes
- Article | IP Ratings Learn more about what an IP rating is and how this rating system is used.
https://www.rdfasteners.com/cs_wiki/wiki/47-ingress-...
